NEWS

How to prevent hardware stamping mold damage

Release Time:

2023-05-26 10:40

The service life of the mold and mold structure design, mold steel selection, heat treatment, surface treatment, machining and grinding, wire cutting process, stamping equipment, stamping materials and processes, mold lubrication, maintenance and repair level is poor and many other factors. Among the various factors that cause mold failure, mold structure is unreasonable, improper selection of materials accounted for about 25%, improper heat treatment accounted for about 45%, process problems accounted for about 10%; equipment problems, lubrication problems and other factors accounted for about 20%. Suzhou hardware stamping parts should pay attention to maintenance after installation to prevent rust and corrosion. In daily use should be light off and on, to prevent hard off and on, causing damage. The following hardware stamping mold processing of the Creative Jie small introduction to how to prevent damage to the hardware stamping parts:

Hardware stamping mold

(1) with hardware fittings model, specifications and performance should be in line with the current national standards and relevant regulations, and with the selection of plastic steel doors and windows to match.

(2) the width of more than 1 meter sliding windows, or the installation of double-glass doors and windows, it is appropriate to set up a double pulley, or the use of rolling pulleys.

(3) The sliding brace hinge shall not be made of aluminum alloy, and shall be made of stainless steel.

(4) Installation of hardware with fastening screws, must be built-in metal liner, the thickness of the liner should be at least twice the distance between the teeth of the fasteners. Shall not be fastened to plastic profiles, and shall not use non-metallic liner.

(5) Hardware fittings gold should be installed, door and window locks, pull handles, etc. should be assembled after the window and door fan into the frame, to ensure the correct position, switching flexible.

Related News

Hardware Stamping Mold Frequently Asked Questions

There is no more common problem in the production of molds than the fact that the molds are always breaking punches, which can be caused by a number of reasons.

2023-05-26

Four key factors affecting the failure of stamping dies

Stamping die is the main process equipment of stamping processing, in industrial production is a more critical die

2023-05-26

What are the characteristics of hardware stamping die classification

Hardware stamping die in China's mold manufacturing industry has developed rapidly, the technical research and production quality and other layers of control. Has gradually towards the development trend of large-scale. Hardware stamping molds are widely used in all walks of life, the following characteristics of hardware stamping molds by the editor to share with you classification. Hardware stamping mold Hardware stamping molds can be divided into 3 categories according to different features First: according to the deformation characteristics of the material classification of the drop mold, punching die, cut off the mold, cutting mold, cutting edge mold, bending mold, deep drawing mold, mold, embossing mold, cold extrusion mold, and so on. Second: according to the nature of the process classification of blanking die, bending die, deep drawing die and forming die. Punching die along the closed or open contour line so that the material to produce a separation of the mold. Bending die so that sheet blanks or other blanks along the straight line (bending line) to produce bending deformation, so as to obtain a certain angle and shape of the workpiece mold. Third: according to the degree of process combination classification of single-process mold, composite mold and progressive die. Single-process mold in a press stroke, only one stamping process is completed in the mold. Composite mold only one station, in a stroke of the press, in the same station at the same time to complete two or more stamping process mold. Progressive die (also known as continuous mold) in the blank feeding direction, with two or more stations, in a stroke of the press, in different stations one by one to complete two or more stamping process mold. Hardware stamping die manufacturing materials are steel, cemented carbide, steel junction carbide, zinc-based alloys, low melting point alloys, aluminum bronze, polymer materials and so on. At present, the vast majority of the materials for manufacturing stamping die to steel-based, commonly used mold working parts of the types of materials are: carbon tool steel, low alloy tool steel, high carbon and high chromium or chromium tool steel, medium carbon alloy steel, high-speed steel, base steel and carbide, steel cemented carbide and so on.

2023-05-26

Hardware precision stamping parts processing when the need to pay attention to the design principles

The designed hardware precision stamping parts must meet the product use and technical function, and can be easy to assemble and repair.

2023-05-26

In accordance with our company motto, "Planning is implementation," we have built a relationship of trust with our customers since the establishment of Mori Die & Mold in 1977, based on careful planning and prompt action. "It is our desire to help our customers succeed, and it is also our company's success.

Plasess Plastics (ZhongShan) Co.,Ltd

Address: 1/3, 2/F, Building E, No. 21 Yanjiang Dongsan Road, Torch Development Zone, Zhongshan, Guangdong, China
Tel：0760-85314317

18925321803 ( Mr. Li )

E-mail：sales_lihaner@plasess-chinamould.com